Ramset has three convenient national location centers ready and equipped to fix your tool. Each location performs warranty, non-warranty and key account repairs for both Ramset gas and powder actuated tools.
Use the Ramset Tool Service Center Map to identify the service center closest to your region.
Warranty information can be found in each tool manual, which can be accessed here.
Ramset Tool Service
13825 West Business Center Drive,
Unit A
Lake Forest, IL 60045
Phone: 800-222-6990
email: toolrepair@itwserviceparts.com
Website: www.ramsetrepair.com
Ramset Tool Service
c/o South Coast Tool Repair
9660 Chesapeake Drive
San Diego, CA 92123
Phone: 858-569-0929
email: mfoerster@socorepair.com
Website: socorepair.com
Ramset Tool Service
c/o Certified Tool Solutions
320 Northpoint Parkway SE
Suite Q
Acworth, GA 30102
Phone: 770-218-6050
email: toolrepairs@gmail.com
Website: www.certifiedtoolsolutions.com
EXPERIENCED TECHNICIANS
Our tool repair specialists are the same people who assemble Ramset tools. They know tools down to the smallest detail.
Leave it to our experienced professionals to take care of your tools repairs. Our technicians identify the failure mode and take the corrective action. We’ll even write up the corrective action on your invoice, so you’ll never be left in the dark about the repair.
WHY USE RAMSET RAPID REPAIR?
Tool Repair Turn Around
Our experienced technicians will make every effort to repair your tool within three (3) business days. Please note we are currently experiencing unusually high demand for support therefore turnaround times may be longer than three (3) business days after we receive your tool.
WHAT IS SIMPLIFIED PRICING?
At Ramset integrity is everything. Our simplified pricing lets you know upfront how much your repair will cost.
See our chart below.
| BASIC | INTERMEDIATE | ADVANCED | |
|---|---|---|---|
| Each tool is completely disassembled, thoroughly inspected, power cleaned, and the piston is dressed. | |||
| POWDER TOOLS | Typical repairs may include items such as a pawl, buffer, or spring | Typical repairs may include items such as a piston, or fastener guide. | Typical repairs may include items such asa barrel, or tool body. |
| Cobra+ | $83 | $117 | $156 |
| BASIC | INTERMEDIATE | ADVANCED | |
|---|---|---|---|
| Each tool is completely disassembled, thoroughly inspected, power cleaned, and the piston is dressed. | |||
| POWDER TOOLS | Typical repairs may include items such as a pawl, buffer, or spring | Typical repairs may include items such as a piston, or fastener guide. | Typical repairs may include items such asa barrel, or tool body. |
| Viper, cobra, R25, 721 | $83 | $117 | $156 |
| SA270, rocket, XT540ALL Disc tools (D45, D45a, D60, Autofast) | $89 | $156 | $201 |
| GAS TOOLS | Typical repairs may include items such as O-rings, piston rings, and an air filter. | Typical repairs may include all wear parts in addition to the actuator, piston, work contact element, or head switch. | Typical repairs may include all wear parts in addition to a sleeve assembly, nose piece, or fan motor. |
| TF1100, TF1200, T3MAG, T3ss, GypFast, MINI T2, 150 Series | $122 | $191 | $272 |
| PNEUMATIC TOOLS | Typical repairs may include items such as roll pins, springs, and yoke tip. | Typical repairs may include all wear parts in addition to the gate or valve assembly. | Typical repairs may include all wear parts in addition to a piston assembly, safety yoke assembly, or nose assembly. |
| GypFast Air, GypFast AIR HD | $122 | $191 | $272 |
All pricing includes return shipping via UPS ground. Shipping can be upgraded at the customer’s expense.
Estimates:Tool repair estimates are not provided unless specifically requested by the party sending the tool in for repair. If the estimate is approved there will be a $25.00 per tool estimate fee in addition to the cost of repair. If the estimate is not approved, the tool will be returned UNASSEMBLED and a $50.00 per tool estimate fee will be charged. If Ramset provides an estimate and receives no reply after 30 days, the tool will be returned UNASSEMBLED and a $50.00 per tool estimate fee will be charged..
Note: Ramset will make every attempt to respond to emails within three (3) business days.
If you prefer more immediate assistance, please call 800-222-6990.